Gold recovery
Gold Dredging Hose
For alluvial gold recovery, sluice feeding, sand and slurry transfer where abrasion, handling and outdoor exposure must be considered together.
Gold recovery · dredging · abrasive slurry transfer
UV-stabilized, abrasion-resistant hose for gold mining & dredging.
Factory-direct rubber hose systems selected around abrasive solids, suction or discharge duty, movement, outdoor exposure and the connection standard required at your site.
For mines, dredging contractors, mineral-processing projects, equipment dealers, importers and distributors. Wholesale and project enquiries only.
Real production photoReinforced red-end dredging hose
Since 2010Hose manufacturing experience
Application-ledConstruction confirmed from duty data
Custom endsFlange and connection options reviewed per project
Bulk exportProject packing and container-loading support
Core hose range
One factory partner for the abrasive transfer line.
These are product families, not fixed specifications. Final tube, wall, reinforcement, cover and end connection are confirmed after reviewing the actual duty.
Pump & dredging line
Dredging Suction & Discharge
Large-bore rubber hose and assemblies reviewed for pump conditions, vacuum, discharge pressure, movement, bend and flange details.
Mineral processing
Abrasive Slurry Hose
For solids-bearing slurry, tailings, sand and dirty-water transfer where particle size, concentration and operating cycle affect selection.
Project configuration
Custom Ends & Assemblies
Colored reinforced ends, flange assemblies, couplings, marking and packing can be reviewed against the approved project specification.
Selection before specification
A hose is only correct when the duty data is correct.
We do not publish one pressure, one wall or one lead time for every gold-mining or dredging application. Send the operating data below so the factory can confirm a suitable construction.
Send Your Duty DataMedium & solids
Water, sand, slurry, tailings or other media; solids concentration, particle size and shape.
Suction or discharge
Working pressure, surge and vacuum conditions, including the pump and start-stop cycle.
Required geometry
Inside diameter, overall length, bend radius, movement, dragging and installation route.
Connections
Flange standard and drilling, coupling, nipple, clamp or other interface details.
Field environment
Outdoor UV, temperature, weather, ground contact, transport and expected service cycle.
Order & destination
Required quantity, destination port or country, packing needs and any inspection documents.
Construction review
Wear path, reinforcement and connection are reviewed as one system.
The photographs below are from supplied product and workshop material. Exact material grades, dimensions and performance values are confirmed for each approved specification.
Wear-contact layer
The inner rubber compound and wall are selected after reviewing the medium, solids and abrasion pattern.
Reinforcement & geometry
Textile and/or wire reinforcement, ID, length and bend behavior are matched to the confirmed pressure or vacuum duty.
Custom flange connections
Flange standard, drilling, face, material and overall assembly length are reviewed and customized for the approved project specification.
Outdoor cover requirement
For West African mine and dredging sites, tell us the expected UV, weather, dragging and handling exposure. The outer cover is then reviewed for the stated environment.
Discuss the application →Built around West African field conditions
From abrasive slurry to rough site handling.
Gold-mining and dredging buyers often need more than a generic “mining hose.” Our review brings the operating conditions, site handling and export plan into one quotation.
UV & weather exposureOutdoor cover requirement reviewed from the actual site.
Abrasive solidsParticle size, shape and concentration guide the wear-side construction.
Transport & movementBending, dragging, lifting and local transport conditions matter.
Project logisticsPacking and container-loading plans are discussed after size and quantity are confirmed.
Factory quotation workflow
Clear inputs before firm performance claims.
We confirm what can be made against your application rather than copying a generic specification from another project.
- 01
Send the application
Duty, size, medium, solids, pressure or vacuum, connections, quantity and destination.
- 02
Factory technical review
We identify missing data and review the construction and connection requirements.
- 03
Drawing or sample confirmation
Dimensions, marking, end details and packing are approved before bulk production where required.
- 04
Production & export packing
Production follows the approved specification, with packing planned around the confirmed order.
Real workshop evidence
A working hose factory—not a stock-photo showroom.
The homepage uses supplied factory and product photographs. The images show workshop production, red-end hose batches, flange assembly and export preparation.
Start a Project Enquiry
Buyer questions
Before requesting a factory quotation.
These answers avoid promising one specification for every mine or dredging project.
What information should I send first?
Send the medium, solids and particle size, required ID and length, suction or discharge duty, working pressure or vacuum, connection details, quantity and destination.
Can you recommend a hose from a photo?
A photo is useful for the first review, but final production needs confirmed dimensions and operating data. A drawing or physical sample may also be required.
Can you make custom flanged assemblies?
Yes. Please provide the flange standard, nominal size, outside diameter, PCD, hole quantity and diameter, face type, material and overall assembly length.
Which pressure, size and length can you supply?
Available construction depends on the medium, solids, suction or discharge duty, geometry and connections. Send the application so the factory can confirm a suitable specification.
What is the production lead time?
Lead time is confirmed after the construction, quantity, end connections, inspection and packing requirements are agreed. We do not publish one lead time for every custom project.
Is this website for retail orders?
No. ZJ Hose Rubber focuses on B2B wholesale and project supply for mines, contractors, equipment dealers, importers and distributors.
Get a factory quotation
Send the duty data—not only the hose name.
We will review the application and reply with any missing technical questions before giving a firm specification or price.